We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Wadi, Jeddah
Al Wadi is an industrial zone in south Jeddah between heavy goods roads and storage facilities, with few homes surrounded by warehousing. Diesel soot clings to every surface and is heavier than ordinary dust, more oily and more stubborn. Offices and residential flats here need cleaning with stronger solutions to remove the grease, and lorries do not stop.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Wadi
Heavy diesel soot clings with force to everything, floors leave a lasting dark mark where soot is walked in, and curtains blacken very quickly. For the method itself, see what post-construction cleaning involves.
-
The first reason
Diesel engine soot clings strongly to every surface
Al Wadi is an industrial district and heavy lorries pass among warehouses all day and night. Diesel engines lift very dark, greasy soot that clings to walls, curtains and floors. Plain solution does not remove it; we need stronger solutions, then scrubbing, then drying.
-
The second reason
The home sits among warehouses and takes dust from every direction
Few homes in Al Wadi are surrounded by warehouses and loading yards. Dust comes from the road, the warehouses and every direction at once. Windows are limited and ventilation difficult, so soot accumulates quickly.
-
The third reason
Coastal humidity adds mould to heavy soot layers
Al Wadi sits close to the coast and humidity makes soot cling more. Walls and cupboards absorb both moisture and soot together, leaving a very strong oily smell.
What post-construction cleaning covers in Al Wadi
An industrial district in south Jeddah with modern storage facilities and warehouse infrastructure, heavy goods routes like Nasser bin Eid Street and King Faisal branch road, and continuous lorry traffic.
-
Dust removed from the top down
Dust falls from above but heavy soot stays low on surfaces and floors. We start by clearing air through low openings, then vacuum soot from below upward.
-
Cement and plaster spots scraped
Cement residue and soot on floors is scraped carefully, not wiped directly, then we apply greasy soot removal solution before washing.
-
Haze off glass and ceramic
Glass holds a dark soot film and ceramic shows black residue; we clean with specialist greasy soot solution then rinse with warm water several times.
-
Paint spatter removed
Paint spatter from renovation on walls is scraped first, then soot residue on walls is wiped with specialist solution, not washed directly as water spreads soot.
-
Stickers and adhesive pulled off
Stickers are removed slowly and adhesive residue wiped carefully so no soot remains trapped underneath.
-
Final floor wash and rinse
Floors are washed with warm water and specialist greasy soot detergent several times, then rinsed with cold water until completely clean.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Al Wadi
Industrial area: workshops, warehouses and loading yards
An industrial district means diesel soot arrives from every direction and clings with force to every surface. Cleaning must use stronger solutions to remove the grease, not simple surface wiping.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
What is different about South Jeddah
South Jeddah runs from the port and the industrial city down towards Al Khumrah, and homes here sit between the sea and the heavy goods roads. The dust is darker and oilier than in the north, a mix of diesel soot and workshop grit, and it clings to net curtains, window sills and the tops of kitchen cupboards. Floors in the older low rise housing are often plain cement or ceramic tile that darkens where soot is walked in. Humidity from the coast adds mildew in bathrooms and a musty smell in stored fabrics.
Questions about post-construction cleaning in Al Wadi
The home is among warehouses with lorries passing every hour, does your cleaning remove soot permanently?
We remove all soot from the home by the end. But Al Wadi is industrial, so soot will return with traffic. We recommend monthly cleaning during hot seasons.
The curtains and sofas turned black from soot, will your cleaning whiten them?
Post-construction cleaning covers hard surfaces, not furnished items. Any curtains and sofas present before cleaning are covered with heavy sheets until we finish.
The floors are old plain cement, does cleaning improve how they look?
We remove soot and grease from the floor, but old cement may not brighten greatly. We focus on removing all soot so the floor becomes lighter and clean.
The bathroom has a very strong oily smell from soot and damp, does your cleaning remove it?
We clean with anti-grease and anti-mould solution in the bathroom, but old strong odours may need strong ventilation for weeks.
The walls leave black soot deposits, how do you clean them?
We use specialist solution to remove soot from walls, clean carefully and rinse with warm water several times until the walls are white.
The flat or office sits among modern warehouses, is your approach different?
Modern warehouses are licensed and meet standards, but soot from roads around them still exists. We focus on removing greasy soot with stronger solutions.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Wadi cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Wadi.
Other services in Al Wadi
We provide these in Al Wadi too, and more than one can share a single visit.
