We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Qawzain, Jeddah
Al Qawzain is a small coastal neighbourhood in south Jeddah, with seaside rest houses and villas near Al Seef Beach, bordered by a sewage treatment works and an iron factory. High humidity and salt air mean construction dust clings hard, and salt leaves a haze on glass and metal that will not shift with ordinary washing.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Qawzain
Coastal moisture makes dust and salt act fast on surfaces, and metals and frames rust quickly if not completely dried after cleaning. For the method itself, see what post-construction cleaning involves.
-
The first reason
Sea salt leaves a white haze that plain water cannot remove
The coastal location means salt seeps everywhere from the salty air. Windows, glass and metal frames carry a white salt layer, and it comes off only with special solvent. Plain water moves salt but does not fully remove it, leaving streaks.
-
The second reason
High humidity makes dust stick hard to every surface
Coastal moisture means construction dust does not wash off easily, clinging hard to glass, marble and ceramic. Cleaning needs strong suction first then washing with specialist solutions.
-
The third reason
The factory and treatment works add oily dust and odour
The iron factory and nearby treatment plant raise humidity, smell and oily grit alongside the salt. Dust here is a complex mix of salt, soot and damp that water alone cannot handle.
What post-construction cleaning covers in Al Qawzain
The direct coastal location means very high humidity and salty air year round. The nearby factory and treatment works add extra moisture and odours, and salt penetrates every gap and corner.
-
Dust removed from the top down
Dust and salt and damp fall from the ceiling and exterior windows together, so we start at the top and high windows, then move to lower surfaces.
-
Cement and plaster spots scraped
Cement and plaster on floors and exterior walls may be mixed with salt from the air, and we clean carefully and wipe salt away before final rinsing.
-
Haze off glass and ceramic
Exterior glass and windows carry a layer of salt and damp together, cleaned with strong solvent then dried with soft cloth to avoid leaving salt residue.
-
Paint spatter removed
Paint spatter may be mixed with salt from the air, requiring scraping and rinsing then thorough drying.
-
Stickers and adhesive pulled off
Stickers and dirt from salty air may be hardened, and are removed carefully to avoid scratching new surfaces.
-
Final floor wash and rinse
Marble and ceramic floors are washed last with clean water and repeated rinses because salt may leave a layer if we do not rinse enough.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
Al Qawzain on the map
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
What is different about South Jeddah
South Jeddah runs from the port and the industrial city down towards Al Khumrah, and homes here sit between the sea and the heavy goods roads. The dust is darker and oilier than in the north, a mix of diesel soot and workshop grit, and it clings to net curtains, window sills and the tops of kitchen cupboards. Floors in the older low rise housing are often plain cement or ceramic tile that darkens where soot is walked in. Humidity from the coast adds mildew in bathrooms and a musty smell in stored fabrics.
Questions about post-construction cleaning in Al Qawzain
The white haze on glass and frames, is it salt or construction dust?
The white haze is sea salt from the air and coast. We clean it with special solvent that dissolves salt, then dry with soft cloth so salt does not return immediately.
Metal window frames are white with salt, will it stay gone for good?
Salt comes off with strong solvent, but the coastal location means it returns fast. We advise wiping metal windows every two weeks after cleaning.
Outdoor curtains are salty and stiff with damp, does your cleaning help?
Salty curtains we can clean if you ask, but salt returns fast on the coast. We advise removing outdoor curtains or washing them separately in a washing machine.
Glass is cloudy with damp and cuts the view, is that salt buildup?
Fog on glass comes from damp and salt together. We clean with solvent then dry completely. Damp may return later on the coast, so opening windows helps drying.
When is the best time to clean a new villa on the coast before moving in?
We advise cleaning right when building finishes, before salt and damp settle on everything. Choose a day without strong wind so salt and sea air do not enter during cleaning.
The treatment works and factory are close to the villa, do smells and damp affect how clean it stays?
Yes, the works and factory raise extra damp, smell and dust. Cleaning removes surface dirt, but odours may linger. We advise opening windows toward the sea after cleaning.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Qawzain cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Qawzain.
Other services in Al Qawzain
We provide these in Al Qawzain too, and more than one can share a single visit.
