We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Rimal, Jeddah
Al Rimal is a new subdivision at the far southern edge of Jeddah among vacant plots and scattered building. The name means sands and the location is inland from the coast, the air is drier than the shoreline but soot and oils from nearby heavy vehicle routes reach the villas. Construction dust here mixes with diesel soot.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Rimal
Building is sparse and vacant plots plentiful, but nearby heavy routes bring soot and oils that settle on new villas. The air is drier but the pollutants are harsher than in interior districts. For the method itself, see how we approach post-construction cleaning.
-
The first reason
Post-construction dust mixes with heavy route diesel soot
Al Rimal is inland but close to heavy truck routes. Fine construction dust mixes with diesel smoke from the vehicles, creating an oily layer on glass and all exposed surfaces. Dry wiping spreads the soot, and water alone will not clean it. Soap and hot water and rapid drying are essential.
-
The second reason
Vacant plots surround each villa with fine gravel
New villas are surrounded by partly excavated plots, sand and fine gravel. Wind carries this grit into the villa and exposes marble and ceramic floors to scratch damage. Floor sweeping needs far more frequency, and if ground work around the villa continues, a second clean is needed within days.
-
The third reason
New windows and doors remain unsealed for some time
New villas often have windows and doors still open or not yet sealing tightly. Even after the first clean, soot and dust re-enter quickly through these gaps. Final cleaning should be delayed until all windows and doors seal completely, otherwise dust returns within days.
What post-construction cleaning covers in Al Rimal
Al Rimal is a far south subdivision whose name means sands, sitting inland of Al Marsa within the same outlying cluster of districts. Like its neighbours it shows almost no named local roads, mosques or other public facilities on current maps, indicating a plan still awaiting significant construction.
-
Dust removed from the top down
Soot and grit fall fast together, hard sweep first thing then work top down with soap and hot water.
-
Cement and plaster spots scraped
Cement spots and oily deposits together need strong soap and very hot water, careful scraping then a final rinse.
-
Haze off glass and ceramic
Glass needs double washing because soot continues falling from the nearby road, use hot soapy water and buff dry with clean cloths.
-
Paint spatter removed
Paint specks may mix with soot and grit, scrape gently and clean with hot soapy water.
-
Stickers and adhesive pulled off
Stickers and adhesive come off easily but glue residue may remain and may need weak acid.
-
Final floor wash and rinse
Floors are washed with strong soap and hot water twice to prevent oils leaving marks on marble.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Al Rimal
New development: ongoing construction and vacant plots between the homes
New development here means many vacant plots and little building immediately around the villa, but nearby heavy traffic routes bring pollutants unrelated to local site work. Soot and oils from trucks are the main issue here, not the surrounding bare land alone.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
What is different about South Jeddah
South Jeddah runs from the port and the industrial city down towards Al Khumrah, and homes here sit between the sea and the heavy goods roads. The dust is darker and oilier than in the north, a mix of diesel soot and workshop grit, and it clings to net curtains, window sills and the tops of kitchen cupboards. Floors in the older low rise housing are often plain cement or ceramic tile that darkens where soot is walked in. Humidity from the coast adds mildew in bathrooms and a musty smell in stored fabrics.
Questions about post-construction cleaning in Al Rimal
Will diesel soot from nearby heavy roads leave permanent marks on glass after cleaning?
The nearby heavy routes will bring new soot, but good cleaning removes it completely at first. We recommend monthly glass cleaning or applying soot-resistant protection after the first clean.
Do floors stay oily after washing because of diesel soot?
They may if we do not use strong soap and hot water. Soot mixes with oils and needs deep cleaning. We use strong soap, very hot water and rapid drying with fans.
Do new curtains and sofas need special treatment here because of soot?
Yes, soot clings to new fabrics easily. We recommend cleaning curtains and sofas before use and avoiding open windows during heavy vehicle traffic hours.
Should we wait until all the building nearby is completely finished before final cleaning?
Yes, waiting until all building work stops is best. Soot will return quickly if site work continues. We recommend a temporary clean now, then a final clean after all construction stops.
Does fine grit from vacant plots scratch new ceramic flooring easily?
Yes, very easily. We therefore sweep hard and carefully, wipe with light moisture only, then dry fast. New marble is very sensitive to grit.
How many times does the villa need cleaning because of soot and surrounding construction?
If building is active, one temporary clean now, then a final clean after work stops. If you wish to move in now, an initial clean, then a second clean within a week or two.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Rimal cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Rimal.
Other services in Al Rimal
We provide these in Al Rimal too, and more than one can share a single visit.
