We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Marsa, Jeddah
Al Marsa is a new subdivision at the far southern edge of Jeddah on the coastal side, where building is scattered and vacant plots surround each villa. Moist sea air mixes with construction dust to form a sticky layer on glass and seaward facing surfaces, and salt in the air leaves marks that dry wiping cannot remove.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Marsa
Proximity to the coast means high humidity and salt in the air, affecting glass, metals and stone much more than in inland districts, requiring specialised cleaning of exposed surfaces. For the method itself, see what post-construction cleaning involves.
-
The first reason
Coastal humidity mixes with construction dust to form a film
Al Marsa is close to the sea and humidity is high. Fine construction dust mixed with sea moisture creates a sticky coating on glass and tile. Dry wiping does not remove it, and water alone will not clean it properly. Warm soapy water and rapid drying are essential.
-
The second reason
Salt in the air leaves white marks on glass and metal
The coastal location means salt aerosol in the air. Salt leaves white deposits on glass, mirrors, door frames and window frames. Ordinary wiping only moves it around, and weak acid or vinegar may be needed to remove it completely. New seaward facing surfaces are most affected.
-
The third reason
New marble floors need protection from salt and moisture penetration
New marble in Al Marsa is exposed to sea salt and moisture from below doors. Moisture may creep in from outside, and salt deposits on the surface. Cleaning requires very fast drying, and protective sealant application after the initial clean may be needed to prevent salt returning quickly.
What post-construction cleaning covers in Al Marsa
Al Marsa is a far south subdivision whose name means harbour or anchorage, lying on the western, more coastal side of the outlying cluster of districts, with no mosques or schools yet named on maps, indicating a plan still at a very early stage.
-
Dust removed from the top down
Dust mixed with salt and humidity falls fast, sweep first thing then work top down with warm water.
-
Cement and plaster spots scraped
Salt deposits and cement spots together need warm soapy water then weak acid if salt stains persist.
-
Haze off glass and ceramic
Glass and mirrors need double washing to remove salt and moisture, warm water and soap then dry cloth then final buff.
-
Paint spatter removed
Paint specks may mix with salt, scrape gently and wash with warm water.
-
Stickers and adhesive pulled off
Stickers and adhesive may be bonded by moisture, weak acid or alcohol may be needed to remove adhesive residue.
-
Final floor wash and rinse
Floors are washed with warm water and dried very fast so moisture does not seep under doors leaving salt stains.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
Al Marsa on the map
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
Landmarks of Al Marsa
Al Marsa is accessed via Al Lith Road from the north or may be reached from the Ring Road or Jeddah Axial Road, and proximity to Jeddah Second Industrial City means the location is isolated but easily reached by the team and equipment.
- Al Lith Road
- The Ring Road
- Jeddah Axial Road
- Jeddah Second Industrial City
Questions about post-construction cleaning in Al Marsa
Will salt from the coast air leave permanent marks on new glass after cleaning?
Salt will return over time because it is always in the air. But good cleaning removes it completely at first. We recommend monthly glass cleaning, or applying a salt-resistant protective coating after the first clean.
Does coastal humidity make soot and dust removal more difficult than inland?
Yes, humidity mixes with dust and creates a sticky layer. Cleaning requires faster drying and more protection than inland districts. Curtains and fabrics may need separate professional cleaning to remove salt and moisture residues.
Do new furnishings need specialist treatment here because of salt and humidity?
Yes, new furniture is exposed to salt and moisture. We recommend cleaning leather and fabric pieces before use and using protective covers or linings. Metals can rust quickly in a coastal environment.
Should windows and doors be washed again after the first cleaning to remove salt deposits?
Yes, we recommend additional washing of windows and doors after main cleaning to remove salt residue. Weak acid or vinegar may be needed to remove white deposits completely.
Does humidity cause mildew in bathrooms after post-construction cleaning?
Yes, high humidity can cause fast mildew growth in bathrooms and sealed spaces. We recommend very good ventilation after cleaning and rapid drying. You may need to request the plumber to confirm ventilation is adequate.
How often should the villa be cleaned here because of salt and humidity?
Initial cleaning removes dust, salt and moisture. After that, salt returns fast because it is always in the air. We recommend light cleaning of glass and exposed surfaces monthly, and full cleaning every three months.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Marsa cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Marsa.
Other services in Al Marsa
We provide these in Al Marsa too, and more than one can share a single visit.
