We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Um Al Salam, Jeddah
Um Al Salam is a relatively old mixed district in south east Jeddah on Old Makkah Road, with flats directly above shops and shared passages that are quite tight. Construction dust here is finer but damp from old walls and working-class streets clings to surfaces longer, leaving a musty smell in stored cloth.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Um Al Salam
Damp from old walls and the nearby drain means dirt and dust stick harder, and cleaning needs moisture management first before true removal is possible. For the method itself, see how we approach post-construction cleaning.
-
The first reason
Old walls hold damp that stops cleaning products from working
Um Al Salam is an old district and walls in the popular housing keep moisture trapped from within the house, especially after winter. Damp stops cleaning solutions sticking to surfaces, so dirt slides off water instead of being lifted. We advise opening windows for hours before cleaning starts.
-
The second reason
Flats next to tight passages where dust returns from outside
Shared passages are very tight and flats sit close together, so construction dust from one unit travels into adjacent flats through gaps. Cleaning needs tight sealing and the tight passage means equipment access is difficult.
-
The third reason
Location on a lorry route leaves heavy soot on surfaces
Old Makkah Road carries heavy traffic and black oily soot clings to windows and exterior surfaces. This soot differs from fine building dust and needs stronger solvent and scraping to remove.
What post-construction cleaning covers in Um Al Salam
The district is old and popular, with buildings packed close on the lorry route to Makkah. Shared passages are very tight between the close flats, and old walls retain more moisture than newer neighbourhoods, especially in bathrooms and enclosed corners.
-
Dust removed from the top down
Dust and soot fall from ceiling and the outside passage together, so we start at the top of the passage before the flat itself because the passage carries soot from the street.
-
Cement and plaster spots scraped
Cement and plaster on floors and old walls needs careful scraping because the walls may have weak paint adhesion from moisture.
-
Haze off glass and ceramic
Interior glass and windows may carry a grey layer of damp and soot together, which we clean multiple times with gaps to ensure complete drying.
-
Paint spatter removed
Paint spatter may be mixed with street soot, requiring light scraping then rinsing.
-
Stickers and adhesive pulled off
Stickers and old dirt may be damp and hardened, requiring careful removal to avoid scratching the old surface.
-
Final floor wash and rinse
Ceramic floors are washed last with clean water and repeated rinses because oily soot may leave a layer if we do not rinse enough.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Um Al Salam
Mixed district: shops at street level with homes above them
Shops beneath flats and tight passages mean post-construction dust and soot need treatment from top to bottom, and sealing gaps is essential so dust does not return from the shop or passage after we finish.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
What is different about East Jeddah
East Jeddah lies furthest from the sea and closest to the open ground and hills beyond the ring roads, so the air is drier and the dust is coarser and paler than on the coast. It comes in under doors and settles on every flat surface overnight, making sofas, mattresses and curtains the heaviest part of the routine. Floors are mostly ceramic tile in the apartment districts and marble in the villa areas, both scratched by grit that is mopped rather than swept. Roof tank water leaves a grey film of sediment in baths and basins.
Questions about post-construction cleaning in Um Al Salam
The old flat has a slight mildew smell from damp, does your cleaning remove it?
Cleaning removes dust and dirt carrying the smell, but moisture in the walls may keep its odour. We advise opening windows after cleaning and running air conditioning to dry the flat completely.
The corridors and stairs are very narrow, how do you move heavy equipment?
Tight passages mean we carry heavy equipment by hand in smaller pieces. We use light equipment in narrow passages and position large tools at the door.
The flat is next to an old commercial shop, does shop smell affect the work?
Shop odours may cling to cloth and corners. Cleaning removes dirt carrying smell, and opening windows afterwards pulls fresh air in.
The shared landing has dust from flats on either side of mine; do you clean that?
Shared landings are normally the building management's responsibility, but during your flat cleaning we seal them to stop dust entering. If you want the landing cleaned too, we will quote that separately.
The bathroom and drain are always damp, is that coming from the shop below?
Bathroom damp may come from the shop beneath or from natural moisture in the district. We clean it with special treatment and dry it completely, though basic damp from the building may remain.
The old ceramic floors darken where moisture sits, does your cleaning make them light again?
Soot and damp darken ceramic over time. Deep cleaning removes the outer layer, but if the darkening is very old it may not all leave. We clean them as well as we can.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Um Al Salam cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Um Al Salam.
Other services in Um Al Salam
We provide these in Um Al Salam too, and more than one can share a single visit.
