We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Balbeid, Jeddah
Balbeid is a new development in north Jeddah alongside the Jeddah Madinah Road within the Obhur expansion, with new villas and modern apartments. Construction continues around the district and large vacant plots sit between occupied homes, so the dust here is heavy with excavation and truck traffic. It settles on new marble and porcelain floors very fast, and fine cement particles rise through the hot air from ongoing building work to settle on new window glass and door frames.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Balbeid
New villas fill with heavy building dust within hours of opening doors and windows, and the dust turns to light mud on new floors if sprinkler spray or water touches it, making cleanup more difficult than dust alone. For the method itself, see how we approach post-construction cleaning.
-
The first reason
Ongoing construction around the district makes dust very heavy and sharp
The houses under construction nearby make dust heavy and filled with cement particles and gravel. It settles on new floors and leaves scratch lines if swept carelessly or mopped without careful dry removal first.
-
The second reason
Empty plots between homes push fine sand through windows and doors
Large gaps between the sparse homes here mean wind blows fine sand directly at windows and doors. When sprinkler spray reaches it the sand turns to light mud, extremely difficult to remove from soft new porcelain without leaving watermarks.
-
The third reason
Brand new villas still hold paint and plaster traces in corners
Completely new homes still have paint and plaster traces in corners and around frame edges, and building dust mixes with these residues, requiring multiple rinses to remove all white cement traces and fine sand completely from surfaces.
What post-construction cleaning covers in Balbeid
A new district in north Jeddah with new marble and porcelain floors, broad windows and gardens awaiting landscaping, but ongoing construction around it loads the air with dust rich in sand, gravel and cement residue that settles heavily on all surfaces.
-
Dust removed from the top down
Heavy building dust is suctioned from top to bottom with emphasis on corners and frames where cement and plaster traces accumulate from new construction work.
-
Cement and plaster spots scraped
Cement, plaster and gravel particles are swept with care before any water is applied, as new soft porcelain scratches easily with small particles under tools or pressure.
-
Haze off glass and ceramic
New glass and window frames are wiped after cement traces have been removed, with multiple rinses to remove all white deposits completely without watermarking the new surface.
-
Paint spatter removed
Fine oily cement dust on glossy surfaces is removed with water rinse before final wiping, taking care not to press or drag tools harshly across the new soft finishes.
-
Stickers and adhesive pulled off
Stickers and plaster residue are softened with gentle moisture and removed without aggressive scrubbing that could scratch brand new soft painted or tiled surfaces.
-
Final floor wash and rinse
Floors are washed last after all dust and gravel have been completely removed, with multiple final rinses in clean water to ensure no cement or sand particles or watermarks remain on the new surface.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Balbeid
New development: ongoing construction and vacant plots between the homes
A new development with ongoing construction nearby means dust is heavy and filled with sharp cement and gravel particles, so we focus on gentle careful sweeping first with soft brushes to avoid scratching new soft surfaces, followed by multiple water rinses to remove all cement traces and sand residue completely.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
What is different about North Jeddah
North Jeddah is largely newer villa districts and compounds around Obhur and inland from it. Homes here tend to have marble or porcelain floors, large windows and a garden or courtyard, so the routine is set by what comes in from outside: fine sand carried on sandals, and sprinkler spray that dries to a chalky ring on tiles. Near the creek and the coast, sea air leaves a faint salt film on glass and on outdoor cushions, which stiffens fabric. Curtains and upholstery in these open plan rooms catch the dust that settles overnight.
Questions about post-construction cleaning in Balbeid
Construction is still ongoing around the villa; should we wait or start cleaning now?
We recommend waiting until construction directly beside the villa is finished for at least two weeks. If you clean now you will need a follow up cleaning after building stops to remove the additional dust that will accumulate.
The floors are brand new shiny porcelain; will sweeping equipment scratch them?
New porcelain is shiny but slightly soft at first, so we sweep with care using soft brushes only, then rinse with clean water. Heavy equipment can leave visible marks if used with force on new surfaces.
Heavy dust fills the house within hours of opening windows; is this normal?
Yes. In new developing districts the dust is very heavy because construction continues around the area. The first clean removes the heavy accumulation but dust returns rapidly while building continues nearby.
Sand enters under doors and on feet, does this speed up dust return?
Yes. Empty plots and ongoing construction mean sand returns very quickly. The first clean removes what has accumulated but the environment makes sand settle again rapidly.
The new glass has white cement traces in the corners; will they come off completely?
Cement residue comes off with gentle scraping and rinsing. If old and hardened on the soft new glass, it may leave a very faint mark that cannot be fully removed without risk of damaging the surface.
How many days does a brand new villa in Balbeid take to clean fully after finishing?
A new villa in a developing district needs about two days because heavy dust and cement residue need intensive rinsing, and the final rinse cycle takes extra time to remove all traces completely.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Balbeid cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Balbeid.
Other services in Balbeid
We provide these in Balbeid too, and more than one can share a single visit.
