Clean first, then disinfect
The common mistake is spraying disinfectant over dirt.

Balbeid is a developing district with ongoing construction and vacant plots, where fine dust and sand enter with every footstep. Disinfection here demands real cleaning first, because sand and grit shield the disinfectant from what it needs to reach, and a spray over a dirty surface is just a spray.
The garden and courtyard bring fine sand into the interior every day, and all surfaces accumulate dust faster than in enclosed neighbourhoods. For the method itself, see what disinfection and sanitisation involves.
Vacant plots around the home release fine dust on the wind, which settles on windows, marble and fabrics. Disinfectant cannot work on accumulated dust, so deep cleaning always comes before disinfection here.
Most homes have a garden and courtyard that need regular irrigation. Sprinkler mist and hard water leave white rings on porcelain and marble, and these rings shield the disinfectant if they are not removed first.
The district is still under active development, so fine dust from excavation and mixing drifts into homes easily. Dampness from building work settles in gaps and needs additional treatment during disinfection.
Internal streets have poor rainwater drainage and flood easily, and the surrounding vacant plots release dust in the wind toward nearby homes.
Sand and fine dust coat every surface rapidly, so cleaning before disinfection is not an extra step but the foundation of the work.
Marble, porcelain and window surfaces trap sand and faint salt residue, and we focus on these carefully before disinfection.
Drains and grout lines collect dust and fine sand from the garden and courtyard, and we clean them thoroughly before disinfection.
Kitchen surfaces and food preparation areas receive disinfection with a food-safe product, after removing dust first.
Grout lines between tiles require special cleaning because they retain moisture and dust from the surrounding environment.
Windows and doors are left closed briefly after disinfection, then opened gradually for ventilation to avoid drawing dust back inside.
A move-in, an illness and an after-party aren't the same job.
Grime and grease shield what's under them.
A disinfectant has to stay wet on the surface to work.
Handles, switches, taps and rails are done by hand because they carry the most and need direct contact that fogging alone doesn't give.
Once the hard surfaces are done, a fine fog reaches the air, the fabrics and the corners a cloth can't, settling over what hand-wiping misses.
We open up and air the rooms, then walk the home with you before leaving.
New development: ongoing construction and vacant plots between the homes
Ongoing construction and vacant plots mean fine dust and damp enter the home daily, so disinfection here always begins with deep cleaning to remove everything that shields the disinfectant from the surfaces it needs to reach.
The common mistake is spraying disinfectant over dirt.
The company runs a large crew, and we send a team rather than one person.
The foggers and the products come with the team.
If what you need is deep cleaning or mould work rather than disinfection, we tell you.
Photographs from real jobs carried out by the crew.












The commitment is simple enough to actually keep: we don't leave until you've seen the result and had your say on it.
North Jeddah is largely newer villa districts and compounds around Obhur and inland from it. Homes here tend to have marble or porcelain floors, large windows and a garden or courtyard, so the routine is set by what comes in from outside: fine sand carried on sandals, and sprinkler spray that dries to a chalky ring on tiles. Near the creek and the coast, sea air leaves a faint salt film on glass and on outdoor cushions, which stiffens fabric. Curtains and upholstery in these open plan rooms catch the dust that settles overnight.
We provide these in Balbeid too, and more than one can share a single visit.