We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Bahr, Jeddah
Al Bahr is one of four historic quarters inside the walled city of Jeddah, in the north western part of Al Balad toward the old harbour behind Bab Al Farda, the old customs gate. Buildings here are ancient stone and carved wooden screens, streets are very narrow and ventilation is severely limited. Proximity to the old port means extremely high humidity and fine salt that penetrates everything.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Bahr
Port humidity is very high and salt penetrates the building from day one, and stone floors and walls retain moisture far more than modern construction. For the method itself, see how we approach post-construction cleaning.
-
The first reason
Port salt mixes with fine building dust
Closeness to the old port means extremely high humidity and fine salt that travels in the air. This salt mixes with construction dust and makes it heavier and more sticky to surfaces. Fresh water rinsing needs many more passes than in other districts.
-
The second reason
Moisture trapped in ancient stone
Coral stone and old foundations absorb water and moisture fast and hold it. This makes dust stick far harder and removal needs forceful rinsing followed by very strong ventilation to dry the moisture out completely.
-
The third reason
Poor ventilation traps salt and humidity
Narrow streets and tightly packed old buildings do not allow good air movement. Even after cleaning, moisture remains trapped in gaps and corners because natural ventilation is too weak to clear it.
What post-construction cleaning covers in Al Bahr
Al Bahr lies in the north western part of Al Balad behind Bab Al Farda near the old port, with heritage stone and timber houses in the traditional roshan style dating from the early thirteenth century Hijri, with extremely limited street ventilation.
-
Dust removed from the top down
Top-to-bottom suction on ancient stone needs greater power because the stone retains moisture and salt deposits very firmly.
-
Cement and plaster spots scraped
Cement and plaster bits mix with salt and moisture, and scraping is followed by forceful rinsing with gentle warm fresh water.
-
Haze off glass and ceramic
Glass and stone need forceful rinsing and very rapid drying to prevent salt bloom returning as water evaporates.
-
Paint spatter removed
Paint spatter on ancient stone is scraped very carefully then rinsed with gentle warm fresh water to avoid damaging the old surface.
-
Stickers and adhesive pulled off
Stickers and adhesive on stone must be removed very gently with gentle warm water rinsing to avoid surface damage.
-
Final floor wash and rinse
Floors are washed last with gentle warm fresh water and a long final rinse, and immediate strong ventilation is essential.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Al Bahr
Historic district: close-set buildings, narrow lanes and ageing services
An old historic district next to the port means salt penetrates everything from day one, and moisture becomes trapped in ancient stone by the dense building fabric.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
What is different about Central Jeddah
Central Jeddah is the old heart of the city: Al Balad with its coral stone houses, and the dense apartment quarters around it with shops beneath the flats. Floors here are often terrazzo or older ceramic tile, worn smooth and easily stained by cooking grease that drifts up from the street. Older kitchens and bathrooms carry heavy scale on taps and around drains, and pipework in the older blocks leaves rust marks in basins. Rugs and curtains take on the fine black dust of the main roads, so they need washing more often than elsewhere.
Questions about post-construction cleaning in Al Bahr
The port humidity is very high, does your cleaning reduce mould smell?
Our cleaning removes surface moisture and salt deposits, but permanent port humidity needs continuous ventilation. Mould will return without good air circulation.
Salt on frames and windows, is it easy to remove?
Fine salt rinses away with repeated fresh water rinsing. Heavy salt deposits may need gentle soaking first before light scraping.
These very old heritage buildings, will your cleaning damage them?
Yes, stone and old timber are very delicate. Our cleaning is very gentle indeed to avoid damaging the ancient surface.
When is the best time to clean an old building in Al Bahr?
Immediately after building work ends and before residents move in, and ideally in the season of lowest humidity if possible.
Does sea salt leave stains on glass like it does in Al Amwaj?
Yes, salt leaves white stains on glass. Repeated rinsing with fresh water is needed and drying must be very fast to prevent bloom.
Bab Al Farda and the old harbour are so close, does it affect new interiors?
Closeness to the port means permanently high humidity and salt in the air. Our cleaning removes current salt, but regular maintenance is necessary.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Bahr cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Bahr.
Other services in Al Bahr
We provide these in Al Bahr too, and more than one can share a single visit.
