We clean it where it is berthed
The work is done at the marina, deck and cabins both.

Al Zumurrud is a coastal district directly facing the Red Sea in north Jeddah, home to beachfront chalets, rest houses and modern villas. Salt and humidity here are heavier than in inland neighbourhoods, and sea winds leave a film on every surface overnight. A moored yacht here needs more frequent cleaning than those in protected areas.
Closed cabins near the beach collect moisture quickly from the sea air, so musty smells appear sooner than in quarters far from the shore. For the method itself, see our guide to yacht cleaning.
The shore here sends continuous spray onto every surface. It dries and leaves a white layer that sticks fast. Fresh water removes it, but sea winds restore it the next day, so yachts need washing more often than inland craft. The turnaround between cleans is shorter here.
The sea is close enough to chalets and berthed yachts that moisture enters cabins even when shut. Bedding and seating hold permanent dampness, and mold starts inside long before it shows on deck. The air cannot dry itself in this setting.
Yachts here may carry both teak and fibreglass, and salt treats them differently. Teak needs oil after fresh water wash, fibreglass needs extra protection from salt buildup. One method does not suit both.
The coastal zone experiences continuous salt spray from the Red Sea. Salty air works on metals and wood faster than the air of inland districts, and settling happens visibly within hours.
Sea winds here restore salt buildup fast, so we rinse thoroughly with plenty of fresh water and ensure every trace of salt is gone before we leave.
Teak on yachts here faces salt and humidity together, so we dry it carefully and apply a protective oil after the fresh water wash.
Cabins here collect moisture quickly from the sea air, so we focus on ventilation and drying work after the main wash is done.
The galley needs attention because salt hangs in the air here, and we clean every opening and drain to prevent salt residue.
The washroom needs strong drying because sea humidity here deposits on tile and mirror glass fast, and mildew starts in grout quickly.
Seating and cushions need frequent washing because salt and moisture return to them fast from the air even between cleans.
Before anything is wiped, the whole exterior is rinsed to soften and float off the salt.
Cabin top, then the sides, then the deck.
The textured areas worked with a brush to lift salt and sunscreen out of the grip, where a rinse leaves it behind.
Windows and windshields cleaned and dried so the mineral spots do not just reappear as the water evaporates.
Cabins, galley and heads wiped and floors cleaned, with hatches open and air moving to pull the damp smell out rather than seal it in.
We walk the deck and cabins with you before we step off.
Al Zumurrud sits about 2 km from Al Gharbiyah and about 2.5 km from Al Corniche.
Open in Google MapsThe work is done at the marina, deck and cabins both.
The company runs a large workforce, and we send a team rather than one worker.
Machines and materials arrive with the team, not rented and not borrowed.
If what you need is gelcoat polishing or teak work rather than cleaning, we say so.
Photographs from real jobs carried out by the crew.












The commitment is simple enough to actually keep: we do not step off before you have seen the result and told us what you think.
Al Zumurrud is bordered by main roads and neighbouring residential areas. We reach the marinas near Omar bin Siddiq Attar Mosque and the Primary Health Care Centre, and we know the roads to the shore and the yacht berthing places.
We provide these in Al Zumurrud too, and more than one can share a single visit.