We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Um Hablain West, Jeddah
Um Hablain West is a relatively new mixed district of shops and flats near King Abdulaziz International Airport and sports academies, and the construction dust left behind does not come off with ordinary wiping. Post-construction cleaning here differs from single-unit flats because the dust travels between the ground floor shop and the flat above.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Um Hablain West
Ground floor shops still under construction leave behind moisture and dust that rises into the flat above even after the shop is sealed. For the method itself, see our post-construction cleaning service in detail.
-
The first reason
Dust travels between shop and flat above
Shops and flats here share passages and voids that connect them directly, so construction dust from the shop enters the flat above despite closed doors. Cleaning requires tight sealing during work and scraping of surfaces where dust has accumulated on both levels.
-
The second reason
Metal doors and new frames collect dust heavily
Shops typically have new metal doors and metal fittings, and dust clings to these surfaces far more strongly than to wood. Removing it requires scrubbing and scraping before washing, or a dull film will remain on the metal.
-
The third reason
Mixed flooring types between shop and flat
The ground floor shop may have thick ceramic or hard marble very different from what is above, and fine soot penetrates the joints in these surfaces deeply. Cleaning must target these joints before the final rinse.
What post-construction cleaning covers in Um Hablain West
The internal streets and passages are newly paved, with shops on the ground floors directly beneath the flats, which means construction dust moves easily between them.
-
Dust removed from the top down
Dust in both shops and flats starts from the ceiling and the tops of cupboards, so we begin above doors because dust can slide downwards once disturbed.
-
Cement and plaster spots scraped
Cement and plaster on floors and metal frames needs careful scraping to avoid scratching new marble or metal surfaces.
-
Haze off glass and ceramic
Glass in windows and glass doors may carry construction salt or glossy dust, which we clean with a special solution then dry thoroughly.
-
Paint spatter removed
Paint spatter on ceramic and marble is scraped first before washing with water, because dried paint does not come off with water alone.
-
Stickers and adhesive pulled off
Stickers on doors and floors from flat numbers and warnings are removed by hand, then any adhesive residue is treated with a solvent.
-
Final floor wash and rinse
Floors in the shop and flat are washed last because scraping and sweeping raise dust, and the final rinse ensures it all leaves completely.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Um Hablain West
Mixed district: shops at street level with homes above them
Shops and flats together mean ground floor dust affects the cleanliness above, so we need a team working on both levels at once or we seal the passages between them to prevent dust crossing during cleaning.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
Landmarks of Um Hablain West
Um Hablain West lies near King Abdulaziz International Airport and Ofuq Al Khail Equestrian Academy, and access is straightforward from the main road, which makes it easy to bring cleaning equipment into the flats and shops.
- King Abdulaziz International Airport
- Mareekh Mountains
- Haramain High Speed Railway
- Ofuq Al Khail Equestrian Academy
Questions about post-construction cleaning in Um Hablain West
How do you clean the flat if the shop below is still unfinished?
We seal gaps and any door opening onto the shop, then work top to bottom, removing stickers and hanging dust first. We ask you not to open that door while we work.
The flat is above a food shop under construction, does workshop smell rise into it?
Smells can rise in the first days, especially if the shop has no ceiling yet. Cleaning itself does not remove odour, but opening windows after we finish pulls fresh air in quickly.
Does your cleaning include the shared passages between shop and flat?
Shared passages are usually the building owner's responsibility, but we seal them during your flat cleaning to prevent outside dirt entering. If you want the passage cleaned too, we will quote that separately.
The new metal doors shined when fitted, does your cleaning preserve that finish?
Proper cleaning preserves the shine because we scrape debris before washing, then dry the metal with soft cloth. Wet mopping alone leaves water marks on it.
How often does the flat need cleaning if building work continues around it?
Once is enough if construction ends completely before we clean. But if work continues afterwards, we recommend waiting for total completion first.
Do metal window frames need special care after cleaning is done?
Metal frames rust if left wet, so we dry them completely after washing. We advise leaving windows open for an hour after we finish so the flat dries out.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Um Hablain West cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Um Hablain West.
Other services in Um Hablain West
We provide these in Um Hablain West too, and more than one can share a single visit.
