We know builder's dust
This is not a heavier version of a normal clean.

Al Yaman is one of four historic quarters inside the old walled city of Jeddah, and one of the oldest residential areas of the city. Buildings here are built of stone, marble and carved wooden screens, streets are narrow and ventilation channels are old and partly blocked. Construction dust in Al Yaman does not leave easily because airflow is weak and moisture becomes trapped between the old walls.
Narrow streets and limited ventilation trap dust and moisture firmly, and old buildings hold higher humidity than modern districts because moisture cannot escape from the dense masonry. For the method itself, see how we approach post-construction cleaning.
Al Yaman has very narrow streets and tightly packed buildings. Air moves slowly between the walls, so dust settles easily and does not disperse far. Opening doors and windows may not create enough ventilation to clear the air effectively.
Wooden screens and old timber absorb moisture from the air. This trapped humidity makes dust heavier and more sticky to surfaces. Rinsing must be followed by very strong forced ventilation to move the moist air out.
Small gaps and corners in heritage buildings trap dust and moisture firmly. Cleaning these requires small tools and great patience, and some spaces may be hard to reach with standard equipment because of the density of the stone and timber structure.
Al Yaman lies in the southern part of Al Balad inside the old city wall south of Souk Al Alawi street, with heritage stone and timber houses, and close to Hassan Annani Mosque and Souk Al Alawi marketplace.
Top-to-bottom suction in Al Yaman takes longer because humidity and narrow streets trap air and make dust stick harder.
Cement and plaster bits may be mixed with moisture, and scraping is followed by gentle warm water rinsing and strong forced ventilation.
Glass and heritage stone may be delicate, so rinsing must be gentle and drying must be very rapid to avoid water damage.
Paint specks on heritage surfaces are scraped very carefully then gently rinsed to avoid damaging the old surface beneath.
Stickers and adhesive are removed carefully, and rinsing must be gentle on old timber and stone to prevent water damage.
Floors are washed last with gentle warm water and a long final rinse, and immediate ventilation is essential to dry out trapped moisture.
We start at the ceiling, vents and the tops of everything, then work down.
The fine powder is vacuumed and dry-collected first.
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
Al Yaman sits about 0.5 km from Al Sahifah and about 0.5 km from Historic Jeddah.
Open in Google MapsThis is not a heavier version of a normal clean.
The company runs a large crew and we send a team, not a single cleaner.
The vacuums and materials come with the team, not rented on the day.
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
Photographs from real jobs carried out by the crew.












The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
Access to Al Yaman is via Hassan Annani Mosque and historic Souk Al Alawi, and cleaning the heritage buildings and old housing requires knowledge of narrow passages and hidden entrances and tight spaces that are difficult for equipment to reach.
We provide these in Al Yaman too, and more than one can share a single visit.