We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Budur, Jeddah
Al Budur is a small mixed-use district where shops occupy ground floors and homes sit above them, located east Jeddah near the Al Jumum boundary. In this simple layout, construction dust falls from the upper flats into the lower shops, requiring top-to-bottom cleaning discipline to avoid recontaminating work already done.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Budur
Ground floor shops receive building dust directly from the flats above them, so cleaning the upper floors first is mandatory before moving down. For the method itself, see the full post-construction cleaning page.
-
The first reason
Flats above commercial units lack complete floor sealing
Gaps between flat floors and shop ceilings allow dust to drop through, and cleaning must begin at the upper storeys and work strictly downward to prevent dust already collected below from being disturbed and rising back up.
-
The second reason
Mixed commercial and residential uses in straightforward buildings
The mixed development here is not a complex arrangement but simple blocks stacking retail and residential, so gaps between units are small and dust travels easily between floors and across shared boundaries.
-
The third reason
University of Jeddah Road nearby sends steady vehicle movement and road dust
The district sits next to a main road and dust from traffic adds to construction dust, requiring the space to be sealed from outside and cleaned bottom up to manage the combined load.
What post-construction cleaning covers in Al Budur
The district lies within Taibah sub-municipality on the Al Jumum boundary, close to the University of Jeddah Road and the Asfan main road, and its straightforward construction means gaps between units are larger than in denser districts.
-
Dust removed from the top down
Dust falls from upper flats into landings and ground floor shops, so top-down cleaning discipline starts with the highest occupied floor.
-
Cement and plaster spots scraped
Cement residue on shared stair treads is thick and needs scraping before the stairs themselves can be washed.
-
Haze off glass and ceramic
Window frames facing the street directly trap construction dust mixed with road grit and require focused attention before glass cleaning.
-
Paint spatter removed
Paint spatter on ceramic and porcelain varies in how it sets depending on the tile finish and whether the surface was sealed.
-
Stickers and adhesive pulled off
Labels and adhesive marks on doors and walls in shared entry areas are stubborn and require only safe solvents.
-
Final floor wash and rinse
Ceramic floors in landings and shops need strong washing to clear dust compacted from building and traffic sources.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Al Budur
Mixed district: shops at street level with homes above them
Mixed-use in Al Budur means that cleaning a flat does not separate from cleaning shared stairs and entry, because ground floor commercial activity continuously redistributes dust upward until the final clean is done.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
Landmarks of Al Budur
Al Budur is positioned between the University of Jeddah Road and Asfan Road, which define the district's geography and accessibility. We reach individual flats and shops by coordinating work based on position relative to these two main traffic routes.
- University of Jeddah Road
- Asfan Road
- Wadi Al Ghawla
Questions about post-construction cleaning in Al Budur
Do you also clean the ground floor shop if homes are above it?
If the shop is also under construction, we clean it as part of the whole residential unit. If it is operating commercially, we clean the flat only, to avoid disrupting the business.
The district is close to University of Jeddah Road, is street dust continuous?
The University road carries heavy traffic daily and dust rises with it. The initial clean removes the baseline of construction debris, then regular maintenance is more effective than trying to prevent all new dust.
Will dust from the ground floor shop travel back up to the flat after cleaning?
If the shop is still under construction, we sequence the work so the shop is cleaned first and the flat a day later at minimum. If the shop is active, a final top-up clean of the flat before occupation is needed.
The stairwell and landing are shared by the shop and flat, is that cleaned too?
Yes, the stairwell, landing and shared entrance are cleaned before the individual units, because dust collects there first and heaviest.
The window faces the street directly, do exhaust fumes and dust enter together?
Yes, especially with heavy traffic, fumes and dust enter via the windows. Cleaning focuses on window frames and the surface around them where traffic dust accumulates.
When should I book cleaning for a flat above a shop still under construction?
Ideally wait until the shop finishes major building work too. If the flat needs cleaning first, a pre-move touch-up before occupation can be done after the shop is done.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Budur cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Budur.
Other services in Al Budur
We provide these in Al Budur too, and more than one can share a single visit.
