Clean first, then disinfect
The common mistake is spraying disinfectant over dirt.

Al Mahjar is a southern district west of Al Waziriyah toward the coast with hospitals and markets, and disinfection here differs because coastal proximity means high humidity and salt air that leaves a film on glass and metal, and dust from heavy King Faisal Road traffic is darker and oilier than simple desert dust.
Surfaces in Al Mahjar need more frequent cleaning because of salt and soot accumulation, and coastal humidity accelerates mould and mildew growth. For the method itself, see how we approach disinfection and sanitisation.
Proximity to the sea means 70% humidity or higher all year round. Salt deposits on glass and metal, and the disinfectant must handle the mould that thrives in damp conditions.
The dust is not fine sand: it is a mix of soot, oil and salt. It clings to curtains and windows and leaves black residue. Cleaning requires more effort than in inland areas.
Cement and old ceramic floors retain soot and mould growth. Disinfectant alone cannot remove the blackening, so initial cleaning is essential.
A coastal southern area near the port and industrial zone with hospitals and shops, where dust is darker and more oily, a mix of truck soot and sea salt that clings to curtains and windows, and older ceramic floors darken quickly where soot is walked in.
Surfaces carry salt and soot from trucks and the sea. Initial cleaning focuses on removing these deposits before disinfection.
Metal railings and doors show corrosion from salt and moisture. We clean these and remove salt deposits before disinfection is applied.
Bathroom taps and drains carry salt scale and mould. We manually clean these then apply concentrated disinfection.
Kitchen surfaces and work tables show soot and salt. We thoroughly clean these before disinfectant is applied.
Drains hold mould and fungal growth from humidity. We manually clean them then apply concentrated anti-mould disinfectant.
Ventilation after disinfection is critical to dry coastal moisture. We may run fans for hours after treatment to remove residual humidity.
A move-in, an illness and an after-party aren't the same job.
Grime and grease shield what's under them.
A disinfectant has to stay wet on the surface to work.
Handles, switches, taps and rails are done by hand because they carry the most and need direct contact that fogging alone doesn't give.
Once the hard surfaces are done, a fine fog reaches the air, the fabrics and the corners a cloth can't, settling over what hand-wiping misses.
We open up and air the rooms, then walk the home with you before leaving.
The common mistake is spraying disinfectant over dirt.
The company runs a large crew, and we send a team rather than one person.
The foggers and the products come with the team.
If what you need is deep cleaning or mould work rather than disinfection, we tell you.
Photographs from real jobs carried out by the crew.












The commitment is simple enough to actually keep: we don't leave until you've seen the result and had your say on it.
South Jeddah runs from the port and the industrial city down towards Al Khumrah, and homes here sit between the sea and the heavy goods roads. The dust is darker and oilier than in the north, a mix of diesel soot and workshop grit, and it clings to net curtains, window sills and the tops of kitchen cupboards. Floors in the older low rise housing are often plain cement or ceramic tile that darkens where soot is walked in. Humidity from the coast adds mildew in bathrooms and a musty smell in stored fabrics.
We provide these in Al Mahjar too, and more than one can share a single visit.