We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Yaqut, Jeddah
Al Yaqut is a mixed district where shops occupy the ground floor and apartments sit directly above, and active construction around Aabir Al Qarat Street intensifies the dust load. The job differs from a purely residential area because debris falls from the shops into the flats below, and daily commercial activity throughout business hours keeps dust moving upward through the building all day long.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Yaqut
Flats here take dust from the shop below first, then from street level, and settled residue gathers on window sills facing the road far more quickly than in residential-only districts. For the method itself, see our guide to post-construction cleaning.
-
The first reason
Dust enters the flat from two storeys at once
The ground floor shop generates dust and grit from sweeping stock and goods, and the flat above inhales what drifts up through ventilation and open windows. Construction in the street adds a second layer, so the job becomes not simply removing settled dust but addressing multiple vertical sources and their interaction through the building's shared air space.
-
The second reason
Glass and tile carry paint spatter from multiple sources
Shop fronts get repainted seasonally and ceilings are repaired, so paint mist settles on the flat's windows and floors. Because the shop below is also being refreshed, spatter rises with warm air currents from below, compounding the load on every glass surface and tile edge in the flat above.
-
The third reason
Soft furnishings and curtains soil faster here
Flats above shops stay open all day because of foot traffic below and goods movement. Outdoor air enters directly and dust clings to fabric and furnishings before they are even fixed in place. Post-construction cleaning of such a flat means cleaning all voids and textiles thoroughly, not only hard surfaces.
What post-construction cleaning covers in Al Yaqut
Busy commercial spines between Al Lulu and Al Sawari with daily delivery trucks supplying ground floor shops, and main roads cutting through the district at peak traffic hours carrying consistent vehicle flow.
-
Dust removed from the top down
Dust falls from the flat ceiling downward but warm air from the shop below lifts some of it back up, so we start from ceilings and shelves and close the flat's windows during sweeping to break the air loop.
-
Cement and plaster spots scraped
Cement residue on floors and walls concentrates at ground level where the rough screed was swept, so we scrape it before any washing or wiping can spread it.
-
Haze off glass and ceramic
Glass carries paint spatter from repainting in both the flat and the shop, and ceramic floor tiles hold haze, so we clean every window edge and grout line with a residue-removal solution.
-
Paint spatter removed
Paint spatter on walls and ceilings is scraped carefully from plaster rather than concrete, and on floors we use gentle abrasion to avoid scratching the gloss coat.
-
Stickers and adhesive pulled off
Stickers on doors and cabinets are removed before washing, and adhesive residue is wiped with dilute solution so it does not mark the paint or varnish.
-
Final floor wash and rinse
Floors are washed with water and detergent then rinsed several times to remove every white trace, then dried completely before anyone walks on them.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Al Yaqut
Mixed district: shops at street level with homes above them
A flat above a shop means dust does not arrive from one direction only: it falls from above and rises from below. Cleaning must begin from both floors simultaneously by pulling air outward, not merely wiping the surface.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
Landmarks of Al Yaqut
Flats on the Al Yaqut Walkway and Aabir Al Qarat Street have constant foot traffic passing between them, and work is timed around quieter periods. We divide the flat into zones based on windows close to the road and windows away from it, so we control air flow from the Walkway toward the street.
- Al Yaqut Walkway
- Aabir Al Qarat Street
- Prince Abdulmajeed Road
- Al Yaqut Mosque
- Al Amin Mosque
Questions about post-construction cleaning in Al Yaqut
The flat is above a clothing shop, does dust from below affect us?
Yes, residue rises with warm air currents. We clear the flat from above first to expel heavy air, then work top to bottom, and clean windows horizontally rather than vertically so debris does not fall onto surfaces already cleaned.
If the shop below is repainting, will spatter drip into our flat?
Light mist floats up into the air and heavy drips fall in the shop, but some clings to the air and enters the flat via ventilation. That is why we clean filters first and clear air conditioning vents before we start.
The flat is partly furnished before cleaning, how do we avoid re-soiling it?
Existing furniture is covered with heavy fabric sheets until we finish clearing the air. We start with dust removal from above, then scrape, then wash as the last step, and remove covers just before the final rinse.
The flat is small and air does not circulate well, should we open every window?
We open them in stages: bedroom windows first to create a flow, and when we reach the living area we open those to expel soiled air outside, before we finish vacuuming and scraping and move on to washing.
The porcelain floor is glossy and scratches from any grit, how do we sweep it?
We sweep with a very soft brush, not a standard broom, then rinse with water and dry. Sand from the street falls into the flat under the doors, so we wipe sills first with a damp cloth before sweeping.
The shop below is newly opened and unpacks stock daily, when do we start cleaning?
We wait until activity settles or begin in the evening after the shop closes. We choose a time when the street is quiet and the shop is shut, so fresh dust does not enter while we work.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Yaqut cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Yaqut.
Other services in Al Yaqut
We provide these in Al Yaqut too, and more than one can share a single visit.
