We know builder's dust
This is not a heavier version of a normal clean.

Al Widad is a simple residential district east of Jeddah that mixes popular housing with newer subdivisions. The small quarters are tightly packed here, so dust travels across shared boundaries and narrow gaps between homes. New villas have small gardens that collect sand and irrigation spray that dries in chalky rings on tiles.
New villas in Al Widad sit closer together than in northern districts, so sand from one villa drifts to its neighbour through low garden walls and shared edges with ease. For the method itself, see what post-construction cleaning involves.
The layout in Al Widad is denser than northern suburbs, and villas stand closer. Sand from ground levelling and gardens travels through construction walls and gaps, and wind carries sand from one villa to the next before finishing is complete.
The district mixes new villas with older houses nearby, and dust and grease from older housing reaches new villas on the wind and in run-off water. Building dust in Al Widad is less pure than in unified new districts.
Each new villa has a small garden and courtyard, and automatic irrigation runs during final snagging. Spray dries to white rings on the front tiles and brickwork, and sand enters the villa from the courtyard with every watering cycle.
A residential district within the Taibah sub-municipality area in east Jeddah on Asfan Road, one of several small neighbouring quarters with simple residential character, close to the University of Jeddah road.
Suction from all surfaces brings sand and dust down before washing, and openings facing other villas need extra attention to catch migrating dust.
Scraping cement and plaster residue from tiles needs care around corners where sand and dust from the garden hide deep in grout lines.
Glass and windows are washed of sand and dust, and chalky rings from irrigation are dissolved in fresh water and dried at once.
Paint spatter and residue are scraped from tiles, and spatter on glass is removed carefully so embedded sand does not scratch the pane.
Stickers and protective tape are peeled carefully, and adhesive residue is cleared because sand may be trapped in the sticky residue.
Floors are washed deeply to remove sand, salt and cement together, and a final dry pass leaves tiles clean and gleaming.
We start at the ceiling, vents and the tops of everything, then work down.
The fine powder is vacuumed and dry-collected first.
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
This is not a heavier version of a normal clean.
The company runs a large crew and we send a team, not a single cleaner.
The vacuums and materials come with the team, not rented on the day.
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
Photographs from real jobs carried out by the crew.












The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
Mixed district: shops at street level with homes above them
A simple residential district means dust migrates between villas through garden walls and shared edges, and winds carry sand from older nearby housing, so cleaning focuses on exterior openings and boundaries more than in larger new compounds.
We provide these in Al Widad too, and more than one can share a single visit.