We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Muntazah, Jeddah
Al Muntazah is an apartment district on the eastern edge of Briman, mostly low rise blocks let to workers with narrow internal streets and worn surfaces from heavy use. Construction dust here does not leave easily because small units and tight gaps between buildings trap air. Wadi Al Asla runs along the eastern boundary and may bring extra humidity in certain seasons.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Muntazah
Small flats and narrow gaps between buildings trap air, and ventilation from a single window may not be enough to clear dust quickly from the whole unit. For the method itself, see the full post-construction cleaning page.
-
The first reason
Small flats trap dust and restrict airflow
Apartment units in Al Muntazah are small and windows are limited. Air moves slowly and dust settles firmly. Opening a single window may not create enough airflow to clear dust from the entire flat.
-
The second reason
Adjacent units create ventilation problems
Flats packed close together in the same block cause poor air circulation. Dust drifting from one unit to the next can delay cleaning. Each unit needs separate ventilation and isolation.
-
The third reason
Worn surfaces hold dirt more firmly
Surfaces and internal passages in Al Muntazah are worn from heavy continuous use. Small cracks and cavities hold construction dust far more firmly than newer districts.
What post-construction cleaning covers in Al Muntazah
Al Muntazah is bounded by Hada Al Sham Road to the north and Muawiyah Al Sulami Street to the west, mostly low rise apartment blocks let to workers, with narrow internal streets and Wadi Al Asla running along its eastern edge.
-
Dust removed from the top down
Top-to-bottom suction needs care to prevent dust moving into neighbouring units through shared gaps and ventilation paths.
-
Cement and plaster spots scraped
Cement and plaster bits are scraped gently on worn surfaces, then rinsed with gentle warm water to clear residue.
-
Haze off glass and ceramic
Windows in the limited openings may trap moisture, and rinsing with rapid drying is essential to prevent staining.
-
Paint spatter removed
Paint spatter on worn surfaces is scraped very carefully to avoid damaging the old finish underneath.
-
Stickers and adhesive pulled off
Stickers and adhesive may be stubborn on worn surfaces, requiring patient work and gentle rinsing to avoid surface damage.
-
Final floor wash and rinse
Floors are washed last with gentle warm water and a final rinse, and rapid drying is essential in small spaces.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
Al Muntazah on the map
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
Landmarks of Al Muntazah
Access to Al Muntazah is via Hada Al Sham Road to the north and Muawiyah Al Sulami Street to the west, and cleaning multiple apartment blocks requires careful coordination across shared passages and stairs to prevent dust spreading from unit to unit during the work.
- Hada Al Sham Road
- Muawiyah Al Sulami Street
- Wadi Al Asla
Questions about post-construction cleaning in Al Muntazah
The flat is very small, can it be fully cleaned in one day?
Yes, a single flat can be cleaned in one day. However ventilation may need extra time for complete drying and dust settling before final inspection.
Dust comes from the neighbouring flat during cleaning, how do you handle this?
We seal shared gaps and cracks before starting, and clean each flat separately. This prevents dust migration between units.
How many windows do Al Muntazah flats have, is ventilation enough?
Most flats have one or two windows. We use extra fans to ensure ventilation is thorough and dust clears completely.
Wadi Al Asla runs near the district, does it affect the cleaning?
The wadi may bring extra humidity in certain seasons, but post-construction cleaning focuses on removing building dust from the flat interior.
Flats packed close together cause problems, do you isolate them?
Yes, we seal shared gaps before cleaning and treat each flat separately to prevent cross contamination and dust migration.
Old worn surfaces in Al Muntazah, do they need extra scraping?
Worn surfaces may hold construction dust more firmly, but scraping is gentle to avoid damaging the aged finish.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Muntazah cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Muntazah.
Other services in Al Muntazah
We provide these in Al Muntazah too, and more than one can share a single visit.
