We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Atheer, Jeddah
Al Atheer is a mixed district on the Jeddah Makkah Expressway in south Jeddah with shops and flats. The location close to the sea and the high-speed road means the dust is darker and oilier. Soot from trucks and cars clings to windows and curtains, sea salt leaves a white film on glass, and high humidity brings a musty smell to bathrooms.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Atheer
New homes in Al Atheer darken quickly as soot settles on the floors, and shiny surfaces show black marks plainly. For the method itself, see the full post-construction cleaning page.
-
The first reason
Expressway soot is heavier and stickier than fine dust
The Jeddah Makkah Expressway is very close, and trucks and cars send heavy diesel fumes. This soot penetrates windows and doors and settles on floors, leaving deep black marks that do not wipe away.
-
The second reason
Sea salt and coastal humidity work together
The sea is very close and humidity is very high. Salt settles on glass and metal frames, and moisture makes everything damp, so mildew smell appears in bathrooms and storage spaces quickly.
-
The third reason
Older cement floors blacken from soot easily
Some older homes in Al Atheer have plain cement floors, and soot leaves a permanent black stain on them. Cleaning must be hard washing to remove the built-up soot layer.
What post-construction cleaning covers in Al Atheer
The district sits on the Jeddah Makkah Expressway and near the port and industrial city, where dust is a mix of diesel soot, workshop grit and sea salt particles.
-
Dust removed from the top down
Heavy soot from the road is vacuumed first from the top down before water, to stop it turning to a sticky residue that is much harder to clean.
-
Cement and plaster spots scraped
Cement and plaster spots on ceramic and tile are scraped, and soot is removed before water is used.
-
Haze off glass and ceramic
Glass and metal frames that have salt and soot need repeated rinsing with clean water until they shine.
-
Paint spatter removed
Paint spatter on floors and tiles is removed, and may be heavy from the humidity, so it needs careful lifting.
-
Stickers and adhesive pulled off
Stickers and sticky tape are pulled off before the final rinse so no adhesive residue is left behind.
-
Final floor wash and rinse
Floors are washed hard and then rinsed many times until they dry clean and free of any soot marks.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Al Atheer
Mixed district: shops at street level with homes above them
Al Atheer is a mixed district very close to the expressway and the sea, so cleaning differs from inland districts. Focus is on removing soot first, then salt, then cement, and the high humidity needs deep ventilation and complete drying after cleaning to stop mould returning.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
What is different about South Jeddah
South Jeddah runs from the port and the industrial city down towards Al Khumrah, and homes here sit between the sea and the heavy goods roads. The dust is darker and oilier than in the north, a mix of diesel soot and workshop grit, and it clings to net curtains, window sills and the tops of kitchen cupboards. Floors in the older low rise housing are often plain cement or ceramic tile that darkens where soot is walked in. Humidity from the coast adds mildew in bathrooms and a musty smell in stored fabrics.
Questions about post-construction cleaning in Al Atheer
Black soot from the main road enters the flat, does your cleaning remove it?
Yes, diesel soot is scraped and then washed hard. Floors and surfaces are rinsed until they are completely clean and free of the black cast.
Salt on the frames and windows, is it easy to remove?
Salt on metal is removed by rubbing and rinsing. We may use metal-safe solutions to avoid marking the frames.
Musty smell from the bathroom and drains, where does it come from?
High coastal humidity causes mould in drains and gaps. We clean drains and gaps thoroughly and let the home dry out completely.
The floor is old plain cement, does cleaning improve its look?
Yes, old cement blackens from soot. Hard washing lifts most of the soot but deep stains may remain and are difficult to remove fully.
The flat sits right on the expressway, does the soot return quickly?
Yes, the expressway sends soot constantly. Our cleaning removes what has entered, but stopping it entering needs closed windows most of the time.
Does coastal humidity cause problems after dry cleaning?
Yes, moisture returns fast. After cleaning, the home needs good ventilation and windows slightly open so it can dry out properly.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Atheer cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Atheer.
Other services in Al Atheer
We provide these in Al Atheer too, and more than one can share a single visit.
