We know builder's dust
This is not a heavier version of a normal clean.
Post-Construction Cleaning in Al Ajaweed, Jeddah
Al Ajaweed is a mixed district where shops occupy ground floors and flats sit above them on basic terrazzo or ceramic tiles. The oily soot from the Jeddah Makkah Expressway that runs along its northern edge clings harder to your windows and curtains than dust does in quieter neighbourhoods. Removing it properly means understanding why soot behaves differently from construction powder.
- A full team, not one person
- Price agreed before we start
- Our own vacuums and materials
- Redone in the same visit
What changes about post-construction cleaning in Al Ajaweed
Light curtains in flats here darken noticeably within weeks of habitation, because the oily particulate from truck exhaust deposits differently than ordinary dust. For the method itself, see our guide to post-construction cleaning.
-
The first reason
Oily soot from heavy goods routes
A mixture of diesel fumes and workshop particles sticks to windows and window sills harder than it does in districts away from the expressway. Suction first removes this bonded layer safely, where early wiping would just redistribute it and smear the glass.
-
The second reason
Older terrazzo and basic ceramic floors darken
Flats above shops in mixed areas typically have plain terrazzo or standard ceramic tile, and soot deposits are walked into the surface leaving black marks. Gentle scraping before washing lifts these marks without scratching the aged finish.
-
The third reason
Bathrooms retain moisture from the coast
Ground-floor and lower-storey flats absorb humidity from the sea, and bathroom mildew leaves a stubborn smell that survives standard wiping. Thorough removal of scale around drains and ventilation afterwards help, but the climate works against you.
What post-construction cleaning covers in Al Ajaweed
The district sits on higher ground with parks and schools, but the heavy goods traffic on the expressway to the north means diesel soot enters constantly.
-
Dust removed from the top down
Oily soot from the expressway settles on high shelves and furniture edges before it reaches the floor, so we begin from the top to avoid re-soiling cleaned surfaces below.
-
Cement and plaster spots scraped
Dried soot clings harder than building dust alone. Scraping requires patience and light pressure to lift it without leaving scratches on ageing ceramic or terrazzo.
-
Haze off glass and ceramic
Glass and metal frames carry a thick layer of oily deposits. We wash twice, once to remove the main layer and again to polish and dry completely.
-
Paint spatter removed
Paint specks lift easily from smooth surfaces, but old dirt in small crevices needs careful inspection and may need a second pass with a safe solvent.
-
Stickers and adhesive pulled off
Stickers and adhesive residue from masking tape need a gentle solvent first to soften the grip before scraping, to avoid leaving glue smears on surfaces.
-
Final floor wash and rinse
Terrazzo and basic ceramic floors darken easily from soot deposits. We wash with warm water and dry immediately to prevent water stains forming on the porous surface.
Not included
- Removing construction rubble, debris or leftover materials
- Repairing scratches, chips or paint touch-ups
- Removing cement or grout that has fully cured onto a surface beyond safe cleaning
- Cleaning inside walls, ducting or fixed machinery
- Hauling away old fixtures or appliances
How the cleaning actually goes
-
1
Top down, never bottom up
We start at the ceiling, vents and the tops of everything, then work down.
-
2
Dry removal before any water
The fine powder is vacuumed and dry-collected first.
-
3
Glass, frames and tracks
Windows, mirrors and the sliding tracks are cleared of grit and sticker residue before the wet stage, so nothing muddy is dragged across them later.
-
4
Haze and specks off hard surfaces
Grout haze, paint spots and adhesive are worked off tile, stone and fixtures with the method each surface can take, tested before we commit to it.
-
5
Cabinets and drawers, inside and out
Every closed space is opened and cleared, because that is where settled dust hides until you reach for a plate months later.
-
6
Floors last, then a walkthrough
Floors are washed only after all the dust above has come down, then we walk the home with you and anything you point to is redone before we leave.
The character of Al Ajaweed
Mixed district: shops at street level with homes above them
Mixed-use here means the flat sits above a shop or storage area, so it receives extra dust from activity and heat below. We pay close attention to the entry door and any balconies overlooking the street.
Why us for this service specifically
A full team arrives together
The company runs a large crew and we send a team, not a single cleaner.
The equipment is ours
The vacuums and materials come with the team, not rented on the day.
We say no when it is no
If a paint spot or cured cement mark cannot come off without risking the surface, we tell you at the inspection rather than damaging it to look busy.
From our work
Photographs from real jobs carried out by the crew.
The job is not closed before you sign off
The commitment is simple enough to actually keep: we do not leave before you have walked the home and told us what you think.
What is different about South Jeddah
South Jeddah runs from the port and the industrial city down towards Al Khumrah, and homes here sit between the sea and the heavy goods roads. The dust is darker and oilier than in the north, a mix of diesel soot and workshop grit, and it clings to net curtains, window sills and the tops of kitchen cupboards. Floors in the older low rise housing are often plain cement or ceramic tile that darkens where soot is walked in. Humidity from the coast adds mildew in bathrooms and a musty smell in stored fabrics.
Questions about post-construction cleaning in Al Ajaweed
Where does the black soot on the windows come from?
It drifts from the heavy goods traffic on the Jeddah Makkah Expressway to the north. The oily particulate attaches to glass and metal frames more stubbornly than ordinary dust, because it is combustion residue and smaller.
Does your cleaning remove the stale smell from the bathroom?
Thorough cleaning removes mildew deposits around drains and fittings that cause the smell, but sea humidity returns it quickly. Ventilation after cleaning helps, but the underlying damp will not disappear completely.
Light curtains blacken fast here, will your cleaning whiten them?
Cleaning removes the deposited soot, but the curtains will darken again soon because of the location. Washing the curtains after the flat is cleaned extends the bright period, but they will need regular care.
The flat is above a shop, is your approach different?
Yes. Flats above shops receive extra dust from the movement and cooking below. We focus on the overlooked surfaces where dirt accumulates fastest, and we are thorough on shared entry areas.
The terrazzo is very old, is your equipment safe on it?
Old terrazzo needs care. We select soft tools and dry immediately to prevent water absorption that leads to cracking. Scraping on worn smooth surfaces is always light and controlled.
When should I book the cleaning after the construction work finishes?
A week after all building and painting is complete. This gives dust time to settle fully, and lets you check that all paint is dry before we begin.
How soon after the work finishes should we book?
After the trades are fully done and no more dust-making work is left. Cleaning before the last sanding or cutting just means paying to do it twice.
How should I prepare before you come?
Clear away tools and leftover materials if you can, and let us know what stage the work reached.
How much does post-construction cleaning in Al Ajaweed cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Ajaweed.
Other services in Al Ajaweed
We provide these in Al Ajaweed too, and more than one can share a single visit.
