We work empty homes daily
An empty home is a different job from a lived-in one, it exposes everything and lets us reach it.

Al Furqan is one of Obhur Al Shamaliyah's newest subdivisions in north Jeddah, sitting alongside Al Muzayria, Al Majami and Al Yusr. An empty home here carries construction dust and sand from surrounding building sites, and the new floors are polished and scratch easily. Move-in cleaning must be careful: removing dust without marking the new polished surface.
New homes here have polished floors and new fittings, but construction dust and sand from neighbouring sites scratch these surfaces easily if not cleaned carefully. For the method itself, see our guide to move-in and move-out cleaning.
New marble or porcelain floors are polished and delicate, and sand grains and fine building dust from nearby work scratch them easily. Cleaning must be right the first time: rough scrubbing will leave permanent marks on the fresh surface.
Construction work continues all around the district, and winds carry sand and fine dust into empty homes every day. Delaying cleaning means more dust arriving and greater risk to the new surfaces.
Brand new cabinets and wardrobes arrive empty, but pass through or near construction zones. Dust enters through joins and edges. Cleaning inside before storing anything is essential.
The district lies in the Obhur Al Shamaliyah extension with newly released land and housing, surrounded by main roads and vacant plots that shed fine dust and sand.
New cabinets carry building dust from joins and edges, so inside cleaning before storage protects new possessions from dust.
The new kitchen needs inspection of appliance shelves, gaps and deep corners where fine construction dust accumulates fastest.
New bathrooms are gleaming, but glass and taps carry fine building dust, and cleaning must be gentle to avoid scratching.
Polished marble and porcelain floors appear spotless but carry embedded dust particles that scratch them if scrubbed hard. Cleaning removes dust from the deepest layer first.
New windows and tracks hold construction dust, and thorough cleaning reaches every sill, track and corner.
Doors, switches and new fittings carry a fine dust layer, and complete cleaning reaches inside switch plates and electrical components too.
We go room to room, note the condition, and agree what's dirt to clean versus damage to report.
Ceiling corners, vents, light fixtures, tops of cabinets and doors, dusted before any water touches a surface, so we're not turning that dust into streaks lower down.
Empty is the moment.
Degrease the counters and fronts, then clean the walls and floor where the stove and fridge stood.
Scale on glass and taps and the grout between tiles is broken down, not just wiped over.
Floors come last, after the dust above has settled and been cleared.
An empty home is a different job from a lived-in one, it exposes everything and lets us reach it.
We send a team, not one person.
Degreasers, descalers and machines arrive with the team.
At the walk-through we tell you plainly what's cleaned and what's wear the clean can't fix, so you're not surprised at your own handover.
Photographs from real jobs carried out by the crew.












The commitment is simple enough to actually keep: we don't leave until you've walked the property and told us what you think.
New development: ongoing construction and vacant plots between the homes
A newly developing area means construction continuing on all sides, and fine dust will keep arriving for months before projects finish. Move-in cleaning here protects new floors and fittings from permanent scratches and sets a clean foundation for your move.
We provide these in Al Furqan too, and more than one can share a single visit.