Clean first, then disinfect
The common mistake is spraying disinfectant over dirt.

Al Shuwaidi is a new district in north Jeddah within the Obhur Al Shamaliyah subdivisions, dominated by the new urban extension of recently released residential plots and ongoing building work. New villas sit on vacant land between them, and fine sand and construction dust enter from the main roads and neighbouring work sites daily.
New homes in Al Shuwaidi receive dust daily from unpaved roads and neighbouring construction sites, and the new villa finishes are sensitive surfaces. For the method itself, see how we approach disinfection and sanitisation.
The district is growing rapidly, so vacant land and exposed roads around new villas send dry dust into homes every day. Deep cleaning before disinfection is essential to remove every trace of dry dust that would reduce effectiveness.
New villas in Al Shuwaidi use porcelain, ceramic and polished marble finishes. These surfaces react to strong chemicals, so we choose a moderate disinfectant and leave contact time without vigorous scrubbing afterward.
New villas have automatic irrigation systems, and hard water leaves chalky rings on tiles fast. Cleaning first removes these deposits before disinfection reaches the surface beneath.
A new urban extension with recent residential plots and continuous building, meaning dry fine dust enters new homes easily from unpaved roads and active construction sites nearby.
Construction dust from the new urban extension must be cleaned thoroughly first. Dry particles need brushing, sweeping and damp wiping before disinfection can work.
New high-touch surfaces carry construction residue and dust. Disinfect them with a moderate product and allow the full contact time without vigorous scrubbing.
New bathroom and kitchen taps may carry irrigation rings and hard water deposits. Clean them first, then disinfect thoroughly with a safe product for new metal.
New kitchen and preparation surfaces need initial cleaning of construction debris, then disinfection with a product safe for the new finishes.
Drains and grout lines in new homes carry construction dust and fine grit. Brush and rinse them thoroughly first, then treat with a disinfectant that penetrates deep.
Ventilation after disinfection matters in a new development where building odours may linger. Open windows and doors fully, then return with you to confirm the air has cleared.
A move-in, an illness and an after-party aren't the same job.
Grime and grease shield what's under them.
A disinfectant has to stay wet on the surface to work.
Handles, switches, taps and rails are done by hand because they carry the most and need direct contact that fogging alone doesn't give.
Once the hard surfaces are done, a fine fog reaches the air, the fabrics and the corners a cloth can't, settling over what hand-wiping misses.
We open up and air the rooms, then walk the home with you before leaving.
New development: ongoing construction and vacant plots between the homes
New development disinfection must balance thorough cleaning of dry dust from ongoing construction and exposed roads with protection for delicate new surfaces that can be harmed by strong chemicals.
The common mistake is spraying disinfectant over dirt.
The company runs a large crew, and we send a team rather than one person.
The foggers and the products come with the team.
If what you need is deep cleaning or mould work rather than disinfection, we tell you.
Photographs from real jobs carried out by the crew.












The commitment is simple enough to actually keep: we don't leave until you've seen the result and had your say on it.
In Al Shuwaidi near Jeddah Madinah Road and Abhor Park, we reach villas through the internal streets that link the subdivision to main roads. Access is straightforward and work is planned around the main streets serving the developing layout.
We provide these in Al Shuwaidi too, and more than one can share a single visit.