The access to reach it safely
A crystal fixture over a stairwell is not a job for a kitchen stool.

Al Salamah is a mixed district in north Jeddah between Prince Sultan Road and Madinah Road, filled with villas and residential blocks along busy commercial streets lined with shops on Quraish and Al Yamamah. Businesses below send grease and fumes rising into the flats above, and villas near the streets trap both irrigation spray and fine sand in their fixtures.
Chandeliers here soil from multiple directions: grease from shops, sand and salt from coastal closeness, and chalky rings from irrigation spray. For the method itself, see how we approach chandelier cleaning.
Quraish and Al Yamamah streets have many food shops and restaurants that release thick cooking grease and fumes that rise into the flats overhead. The grease clings to chandeliers and dulls them. Deep washing is the only cure.
Closeness to the beach means fine sand enters homes with the air and faint salt settles on glass and metal. The modern chandeliers in Al Salamah trap this sand readily.
Villas and flats in Al Salamah have courtyards and gardens with modern irrigation that sprays water, leaving chalky mineral rings on floors and fixtures. Cleaning must remove these deposits.
The district sits between the busy commercial streets of Quraish and Al Yamamah and lies close to the coast with open gardens, carrying both trading activity and widespread sprinkler systems.
Fixtures in mixed districts need careful inspection to distinguish grease from sand and mineral deposits before choosing a cleaning method.
Cutting electrical power is essential, especially in flats above shops that may have old wiring.
Detailed photography before dismantling helps us understand its structure and return all pieces to their right places.
Washing each piece separately removes grease, salt and mineral deposits effectively.
Cleaning frame and arms includes careful removal of grease marks, salt and mineral rings.
Reassembly includes confirming all connections are safe and the lights work properly.
The circuit is switched off before anything is touched, and warm bulbs are given time to cool.
We check how it is built, which crystals are loose, and how it comes apart before removing a thing.
The area under the fixture is covered before we start, so a dropped crystal lands soft and nothing marks the floor or table below.
Where the piece allows, crystals come off and are washed and dried individually.
With the crystals off or aside, the frame, arms, bulb holders and ceiling mount are wiped down, since that is where film and webs hide behind the glass.
Every crystal goes back to its place, the fixture is switched on and checked, and we walk the room with you.
A crystal fixture over a stairwell is not a job for a kitchen stool.
We send a team, not one person, so crystals come off, get washed and go back in one visit, without a lone worker hurrying a fragile piece to finish before dark.
Whether crystals come off or are cleaned in place depends on how the fixture is built.
Nothing is done until the fixture is back together, switched on, and you have seen it throw its light.
Photographs from real jobs carried out by the crew.












The commitment is simple enough to actually keep: we do not leave until the fixture is reassembled, lit, and you have seen it for yourself.
Mixed district: shops at street level with homes above them
Shops below mean heavy grease and fumes rising constantly, not just sand and salt, so fixtures here need deeper and more frequent cleaning than chandeliers in villas far from businesses.
We provide these in Al Salamah too, and more than one can share a single visit.