We clean it where it is berthed
The work is done at the marina, deck and cabins both.

Abhur South is an open coastal stretch on Obhur Creek with a long corniche, where high humidity and salt air work on the yacht without pause. Salt settles faster here than in sheltered inland moorings, and the moisture trapped in cabins creates recurring mould smell that demands frequent attention.
Yachts berthed here accumulate salt spray with greater intensity than other areas, requiring deeper and more frequent rinsing to keep surfaces clean and the paint intact. For the method itself, see what yacht cleaning involves.
The open position on Obhur Creek means direct exposure to wave spray and sea air. Salt spray dries on every external surface, leaving a thick white deposit that quickly dulls the fiberglass finish and fades the original colour of the hull.
High relative humidity on the coast makes sealed cabins an ideal environment for mould growth. The musty smell returns fast even after cleaning if the yacht is not dried with care.
South Obhur Corniche stretches a long way open to the sea. This constant exposure to salt air means that salt penetrates deeper into cracks and openings faster than in sheltered moorings.
The open coastal location on Obhur Creek means direct exposure to salt spray and damp sea air throughout the year, with no protection from inland geography.
Exterior surfaces here need strong fresh water rinsing to clear heavy salt deposits, with careful attention to corners and openings.
Teak decking is affected by salt and moisture together, so we wash it with a specialist cleaner that protects the grain and finish.
Cabins need deep cleaning with complete drying, and we open all windows for ventilation and remove residual moisture.
The galley faces high humidity and salt, so we clean it thoroughly and dry every corner.
The onboard washroom here needs intensive treatment to remove salt and mould from coastal humidity.
Seating and cushions are affected by moisture, so we wash them carefully and dry completely to prevent mould.
Before anything is wiped, the whole exterior is rinsed to soften and float off the salt.
Cabin top, then the sides, then the deck.
The textured areas worked with a brush to lift salt and sunscreen out of the grip, where a rinse leaves it behind.
Windows and windshields cleaned and dried so the mineral spots do not just reappear as the water evaporates.
Cabins, galley and heads wiped and floors cleaned, with hatches open and air moving to pull the damp smell out rather than seal it in.
We walk the deck and cabins with you before we step off.
The work is done at the marina, deck and cabins both.
The company runs a large workforce, and we send a team rather than one worker.
Machines and materials arrive with the team, not rented and not borrowed.
If what you need is gelcoat polishing or teak work rather than cleaning, we say so.
Photographs from real jobs carried out by the crew.












The commitment is simple enough to actually keep: we do not step off before you have seen the result and told us what you think.
South Obhur Corniche is the main waterfront location, and we can reach yachts from several points along the corniche. Obhur Creek nearby defines the geographical position and direct exposure to salt and moisture.
We provide these in Abhur South too, and more than one can share a single visit.