We test before we treat
Reading the water first isn't optional to us.
Swimming Pool Cleaning in Al Furqan, Jeddah
Al Furqan is a subdivision of Obhur Al Shamaliyah in north Jeddah, one of the newest northern urban extension plans with newly released land and scattered construction. Water supply may carry sediment from new boreholes and newly laid pipes are still shedding installation debris. Pools here need exact testing and frequent assessment.
- A full team, not one person
- Price agreed before we start
- Our own pumps and test kit
- Reworked in the same visit
What changes about swimming pool cleaning in Al Furqan
New pipes here need time to self-clean from installation dust and debris, and water may arrive cloudy in the first weeks because pipes carry embedded particles. For the method itself, see how we approach swimming pool cleaning.
-
The first reason
New district means pipes loaded with installation and cutting dust
Freshly installed pipes carry fragments from cutting, welding and joining and construction dust. This debris enters the first water in early weeks. Frequent flushing and exact testing are essential.
-
The second reason
New boreholes carry ancient layer sediment into fresh supply
Recently drilled boreholes penetrate ground never flooded before. First water carries sediment and mineral particles from these virgin strata. This settles but needs repeated treatment initially.
-
The third reason
Scattered building means dust from multiple excavation sites
Scattered construction and vacant land between homes means continuous digging. Dust from multiple excavation sites enters pools from different directions and in irregular concentrations. The filter clogs at unpredictable rates.
What swimming pool cleaning covers in Al Furqan
A subdivision of the newest Obhur Al Shamaliyah developments in north Jeddah, part of the most recent northern urban expansion, with newly released homes and land and scattered building between main roads.
-
Water chemistry tested first
Al Furqan water initially carries sediment from new pipes and boreholes, and initial testing must determine sediment level and whether a preliminary deep flush is needed.
-
Brushing walls and waterline
Walls collect light deposits and building dust, and brushing must be deep to remove thin sediment layers before they harden on the tile.
-
Vacuuming the pool floor
The pool floor accumulates sediment from pipes and building, and vacuuming must be deep with closely spaced cycles.
-
Skimmer and baskets cleaned
The skimmer fills quickly with debris and building dust, and inspection three times weekly is essential during building and early weeks.
-
Filter backwash
Filter backwashing takes a long time initially because sediment clings hard to the media. Early weeks may need nearly daily flushing.
-
Chemical balance reset
Chemical balance needs frequent testing because sediment and water load affect chlorine stability. Humidity from building work depletes chlorine rapidly.
Not included
- Repairing pumps, filters or pool plumbing
- Fixing cracks, leaks or replacing tile
- Draining and acid-washing an empty pool, that is a separate service
- Removing permanent staining from metals or long-neglected plaster
How a pool is actually cleaned
-
1
Test before we add anything
pH, sanitiser and hardness are read at the start.
-
2
Skim and net first
Floating leaves and debris come off before we brush.
-
3
Brush walls, steps and waterline
Algae and the oily waterline film cling to the surfaces.
-
4
Vacuum the floor
Silt settles in the deep end and the corners the return jets never reach.
-
5
Clean the filter and baskets
The skimmer and pump baskets are cleared and the filter checked or backwashed.
-
6
Balance, dose, and walk it with you
With the water clean, we balance and dose, then walk the pool with you before leaving.
Al Furqan on the map
Why us for this service in particular
A full team arrives together
The company runs a large crew, and we send a team rather than one person.
Our equipment, not rented
Pumps, vacuum heads and the test kit come with the team.
We say no when it's no
If the pump or the plumbing is the real problem, we tell you.
From our work
Photographs from real jobs carried out by the crew.
The job isn't closed until you approve it
The commitment is simple enough to actually keep: we don't leave until you've seen the result and had your say on it.
The character of Al Furqan
New development: ongoing construction and vacant plots between the homes
New development means newly installed pipes are still shedding cutting and welding debris, new boreholes deliver water from strata never flooded before, and scattered building generates dust from multiple excavation sites arriving at pools in unpredictable amounts and directions.
Questions about swimming pool cleaning in Al Furqan
Why does water stay cloudy in the first weeks after filling?
New pipes carry dust from installation, welding and cutting. New boreholes carry sediment from untouched strata. Frequent filter flushing is essential until water stabilises.
How often should the filter be flushed in Al Furqan?
The first weeks need flushing every three days or more. After a month it may drop to weekly. Sediment reduces slowly but demands close attention.
Will the water improve if we wait several weeks?
Yes, after one to two months it will improve greatly. Pipes will clear and boreholes will settle. Regular flushing speeds this significantly.
Do we need specialist treatment in the first weeks?
Exact initial testing tells us. If sediment is heavy we may use specialist chemicals to speed the cleaning process.
Does construction work nearby worsen the water quality?
Yes, greatly. Building raises dust that enters the water. Once nearby construction ends, water quality will improve noticeably.
How often per year should Al Furqan pools be treated in the first year?
The first three months need frequent weekly or more intensive treatment. After that standard weekly treatment usually suffices. Ongoing construction may delay overall improvement.
Do you repair pumps or filters?
No. We clean and balance the water and clear the baskets and filter, but repairing pumps, motors or plumbing is a separate trade. If we find a mechanical fault, we tell you what it is so you can get it fixed.
Do you drain the pool to clean it?
Not for a normal clean. Vacuuming, brushing and balancing are all done with the pool full. Draining and acid-washing is only for specific cases like heavy staining or a full reset, and that is a separate service we'd discuss first.
How much does swimming pool cleaning in Al Furqan cost?
It is set after the inspection, because it follows the size of the job, the materials involved and their condition. Send photos on WhatsApp and we will give you an estimate before we reach Al Furqan.
Other services in Al Furqan
We provide these in Al Furqan too, and more than one can share a single visit.
